Skip to content
How to frame a picture in the frame? - Modern Memory Design Picture frames - NJ Frame shop Custom framing

How to frame a picture in the frame?

How to frame a picture in the frame?

You can save a lot of money on photos if you know how to frame them yourself. It is easy to do and doesn't take more than a few hours. You will need a saw, hammer, clamp, and nails to frame a picture. This project is easy and can be done in just a few hours. You can do it without trouble if you have a drill and a screwdriver. Modern Memory Designs sells the most beautiful picture frames you can find.

What do you need to frame a picture frame?

The frame can only be made of metal or wood on the back. You will need a picture frame with a wire and a hook on the back. You will need a backing board or mounting board to keep your picture in place. A black backing and mounting board meant for long-term storage will help protect your images.

You could also choose not to frame the glass. Consider where the photo will be displayed before choosing between glass and acrylic glazing. If your photo is displayed near children or in a busy place, acrylic may be a better choice for framing.

So as not to damage the frame, each type of hanging equipment must be put in a particular place. A small piece of metal or wood can hold the wire in place, strengthening the frame as a whole. You will also need staples and nails for this project to be done. You will also need a screwdriver to put the wire into the back of the frame.

How to frame a picture in a frame?

The best way to frame a picture is with a frame that looks good in your home. There are many different kinds of picture frames, but the size of the frame you choose is significant. If the picture frame is too small, the picture to be framed won't fit in it.

If the picture frame is too big, it will be hard to put it in the right place. When choosing a frame, think about how big the picture is. The frame should be more significant than the picture itself. You need a more petite frame to put a small photo in a frame.

  1. Take off the protective shrink film from the photo frame or picture frame and set it down with the front facing down on your work surface or table.
  2. You can use your fingernails, a butter knife, or a flat-head screwdriver to lift the flexible flip tabs from a flat position. So, the backing board will be easy to take out of the picture frame.
  3. Carefully take off the photo frame's face paper and mat board. Make sure the glass doesn't come loose from the frame. Don't try to take the picture out of the frame by taking the glass off.
  4. You can put your picture on a flat surface. Put the window mat board over the photo to make sure it's shown off right.
  5. Then, put the picture on the table with its front facing down. Before you turn it back over, put the clear tape around the top edge, leaving some of it showing.
  6. To finish the project, put the mat board over the photo and press down hard on the tape on the back to stick it to the back of the photo.
  7. To make sure the tape stays on the mat board, press the mat board down hard on it. You are done putting your photos in frames.

How to use the frame as a design on your wall?

You could just paint over the frame and hang it on the wall. Start by painting the frame the color you want. Because of this, your wall design will look like it has more depth. Once the paint is dry and the glue is set, it will be easier to hang the frame on the wall. Last, use a piece of fabric or thin cardboard to hang the frame on the wall.

The bottom line:

It's not as hard as you might think to make a picture frame. The easiest things to use to frame a photo are a wooden frame, a picture mat, and a picture wire. For high-end interior design, you need modern picture frames. There are so many ways to put a picture in a frame!


Previous article Best Picture frame sizes online for your Photos

Leave a comment

* Required fields